Adjustment
15
Bobbin winder
.04.15
● Position drive wheel 1 (screws 2) according to requirement 1.
● Position bolt 3 (screw 4) according to requirement 2.
20
Requirements
1. When the bobbin winder is engaged, the winding spindle must be driven reliably. When the
bobbin winder is disengaged, the friction wheel 5 must not be moved by drive wheel 1.
2. The bobbin winder must switch itself off, when the fi lled thread is about 1 mm from-
the edge of the bobbin.
1
2
4
3
Fig. 15 - 15
5