Agilent Technologies 54621A Programmer's Manual page 98

Programmer's Quick Reference
Commands and Queries
Command
:MEASure:VBASe [<source>]
:MEASure:VMAX [<source>]
:MEASure:VMIN [<source>]
:MEASure:VPP [<source>]
:MEASure:VRMS [<source>]
n/a
:MEASure:VTOP [<source>]
:MEASure:XMAX [<source>]
:MEASure:XMIN [<source>]
:MERGe <pixel memory>
*OPC
:OPEE <n>
n/a
n/a
8-10
Query
:MEASure:VBASe? [<source>]
:MEASure:VMAX? [<source>]
:MEASure:VMIN? [<source>]
:MEASure:VPP? [<source>]
:MEASure:VRMS? [<source>]
:MEASure:VTIMe?
<vtime>[,<source>]
:MEASure:VTOP? [<source>]
:MEASure:XMAX? [<source>]
:MEASure:XMIN? [<source>]
n/a
*OPC?
:OPEE?
:OPER?
*OPT?
Options and Query Returns
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<base_voltage> ::= voltage at the base of the selected waveform
in NR3 format
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= maximum voltage of the selected waveform in
NR3 format
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= minimum voltage of the selected waveform in
NR3 format
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= voltage peak-to-peak of the selected
waveform in NR3 format
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= calculated dc RMS voltage in NR3 format
<vtime> ::= displayed time from trigger in seconds in NR3 format
<return_value> ::= voltage at the specified time in NR3 format
<source> ::= {CHANnel<n> | FUNCtion | MATH} for 546xxA
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15 | FUNCtion |
MATH} for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= voltage at the top of the waveform in NR3
format
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= horizontal value of the maximum in NR3 format
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= horizontal value of the maximum in NR3 format
<pixel memory> ::= {PMEMory{0 | 1 | 2}}
ASCII ""1"" is placed in the output queue when all pending device
operations have completed.
<n> ::= 16-bit integer in NR1 format
<n> ::= 16-bit integer in NR1 format
<return_value> ::= n, A.XX.XX
n identifies the module.
XX.XX identifies the module software revision.
N2757A, A.XX.XX