Agilent Technologies 54621A Programmer's Manual page 97

Command
:MEASure:PERiod [<source>]
:MEASure:PHASe [<source1>]
[,<source2>]
:MEASure:PREShoot [<source>]
:MEASure:PWIDth [<source>]
:MEASure:RISEtime [<source>]
:MEASure:SHOW {1 | ON}
:MEASure:SOURce [<source1>]
[,<source2>]
:MEASure:TEDGe
<slope><occurrence>[,<source>]
n/a
:MEASure:VAMPlitude [<source>] :MEASure:VAMPlitude?
:MEASure:VAVerage [<source>]
Query
:MEASure:PERiod? [<source>]
:MEASure:PHASe? [<source1>]
[,<source2>]
:MEASure:PREShoot? [<source>] <source> ::= {CHANnel<n> | FUNCtion | MATH}
:MEASure:PWIDth? [<source>]
:MEASure: RISEtime? [<source>] <source> ::= {CHANnel<n> | FUNCtion | MATH}
:MEASure:SHOW?
:MEASure:SOURce?
:MEASure:TEDGe?
:MEASure:TVALue? <value>,
[<slope>]<occurrence>
[,<source>]
[<source>]
:MEASure:VAVerage? [<source>] <source> ::= {CHANnel<n> | FUNCtion | MATH}
Programmer's Quick Reference
Options and Query Returns
<source> ::= {CHANnel<n> | FUNCtion | MATH} for 546xxA
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15 | FUNCtion |
MATH} for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= waveform period in seconds in NR3 format
<source1,2> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= the phase angle value in degrees in NR3
format
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= the percent of preshoot of the selected
waveform in NR3 format
<source> ::= {CHANnel<n> | FUNCtion | MATH} for 546xxA
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15 | FUNCtion |
MATH} for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= width of positive pulse in seconds in NR3
format
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= rise time in seconds in NR3 format
{1}
<source1,2> ::= {CHANnel<n> | FUNCtion | MATH} for 546xxA
<source1,2> ::= {CHANnel<n> | DIGital0,...,DIGital15 | FUNCtion |
MATH} for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= {<source> | NONE}
<slope> ::= direction of the waveform
<occurrence> ::= the transition to be reported.
<source> ::= {CHANnel<n> | FUNCtion | MATH} for 546xxA
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15 | FUNCtion |
MATH} for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= time in seconds of the specified transition
<value> ::= voltage level that the waveform must cross.
<slope> ::= direction of the waveform when <value> is crossed.
<occurrence> ::= transitions reported.
<return_value> ::= time in seconds of specified voltage crossing
in NR3 format
<source> ::= {CHANnel<n> | FUNCtion | MATH} for 546xxA
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15 | FUNCtion |
MATH} for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= the amplitude of the selected waveform in
volts in NR3 format
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= calculated average voltage in NR3 format
Commands and Queries
8-9