Agilent Technologies 54621A Programmer's Manual page 96

Programmer's Quick Reference
Commands and Queries
Command
n/a
:MARKer:Y1Position
<positon>[suffix]
:MARKER:Y2Position
<positon>[suffix]
n/a
:MEASure:CLEar
:MEASure:COUNter [<source>]
:MEASure:DEFine DELay, <edge
spec1, edge spec2>
:MEASure:DEFine THResholds,
<threshold spec>
:MEASure:DELay [<source1>]
[,<source2>]
:MEASure:DUTYcycle [<source>] :MEASure:DUTYcycle? [<source>] <source> ::= {CHANnel<n> | FUNCtion | MATH} for 546xxA
:MEASure:FALLtime [<source>]
:MEASure:FREQuency [<source>] :MEASure:FREQuency?
:MEASure:NWIDth [<source>]
:MEASure:OVERshoot [<source>]
8-8
Query
:MARker:XDELta?
:MARKer:Y1Position?
:MARKer:Y2Position?
:MARKer:YDELta?
n/a
MEASure:COUNter? [<source>]
:MEASure:DEFine? DELay
:MEASure:DEFine? THResholds
:MEASure:DELay? [<source1>]
[,<source2>]
:MEASure:FALLtime? [<source>] <source> ::= {CHANnel<n> | FUNCtion | MATH} for 546xxA
[<source>]
:MEASure:NWIDth? [<source>]
:MEASure:OVERshoot? [<source>] <source> ::= {CHANnel<n> | FUNCtion | MATH}
Options and Query Returns
<return_value> ::= X cursors delta value in NR3 format
<positon> ::= Y1 cursor position value in NR3 format
[suffix] ::= {V | mV | dB}
<return_value> ::= Y1 cursor positon value in NR3 format
<positon> ::= Y2 cursor position value in NR3 format
[suffix] ::= {V | mV | dB}
<return_value> ::= Y2 cursor positon value in NR3 format
<return_value> ::= Y cursors delta value in NR3 format
n/a
<source> ::= {CHANnel<n>} for 546xxA
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15 |} for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::=counter frequency in Hertz in NR3 format
edge_spec1 ::= [<slope>] <occurrence>
edge_spec2 ::= [<slope>] <occurrence>
<slope> ::= {+ | -}
<occurrence> ::= integer
<threshold spec> ::= {STANdard} | {<threshold mode>,<upper>,
<middle>,<lower>}
<threshold mode> ::= {PERCent | ABSolute}
<source1,2> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= floating-point number delay time in seconds
in NR3 format
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15 | FUNCtion |
MATH} for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= ratio of positive pulse width to period in NR3
format
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15 | FUNCtion |
MATH} for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= time in seconds between the lower and upper
thresholds in NR3 format
<source> ::= {CHANnel<n> | FUNCtion | MATH} for 546xxA
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15 | FUNCtion |
MATH} for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= frequency in Hertz in NR3 format
<source> ::= {CHANnel<n> | FUNCtion | MATH} for 546xxA
<source> ::= {CHANnel<n> | DIGital0,...,DIGital15 | FUNCtion |
MATH} for 546xxD
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= negative pulse width in seconds-NR3 format
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= the percent of the overshoot of the selected
waveform in NR3 format