Installation At A Glance - HP E2494A Installation Manual

Installation at a Glance

This Installation Guide shows how to connect Hewlett-Packard's
HP E2494A Probe Adapter to an Intel Mobile Pentium
This probe adapter provides a quick and reliable means of connecting
the HP E2487A Preprocessor Interface to supported target systems,
using the 190-pin Mictor connector. The supported target systems
include the Pentium II Instrumented Mobile Module, and the Pentium
II Mobile Processor mounted on Intel's Instrumented Interposer board.
Installation Overview
•
Connect the preprocessor interface to the probe adapter.
•
Connect the probe adapter to the target system 190-pin Mictor
connector, and adjust the adjustment screws.
®
Pentium is a U.S. registered trademark of Intel Corporation.
2
®
II processor.