Power Switch; Power Jack; Audio Jacks; Phones Jack - Kurzweil sp88x User Manual

Power Switch

Press the white dot to turn the Stage Piano on or the blank area to turn it off. If it will
be off for a long period of time, unplug the power adapter from the wall. The Stage
PianoÕs hi-tech EEPROM memory is like a computerÕs hard drive and needs no power
or battery to retain information. So there is no advantage in leaving the power on.

Power Jack

Plug the cord from the included power adapter into this jack. Try to always use the
adapter supplied with the unit. However, if it should become lost or forgotten, refer to
SpeciÞcations on page 8-8 for information about possible substitutes.
To help prevent the power cord from being pulled out accidentally, a cord retainer is
mounted near the power jack. To use, just wrap a 3/4 loop around it as illustrated.
Figure 2-3

Audio Jacks

The left and right audio jacks are used to connect to your audio system. See Connecting
to Your Audio System on page 2-5 for connection details.

Phones Jack

Plug your headphones in here. YouÕll need a Ò1/4 -inch to-1/8-inchÓ (or
Òphone-to-miniÓ) adapter plug when using headphones that have a mini plug. See
Connecting Headphones on page 2-6 for additional information.

Switch Pedal Jack

Use this jack to plug in the single piano pedal that came with your Stage Piano. For
this pedal to work properly, it must be plugged in before power is turned on. See A
Special Note About Switch Pedals on page 2-4 for info about using aftermarket single or
dual pedals.

Control Pedal Jack

You can plug a control pedal in here but be careful, not every kind will work well. See
Connecting a Control Pedal on page 2-4 for details.
12VDC 0.5A
Power Cord Retainer
SP88
Getting Started
The Rear Panel
2-3