Table of Contents
Advertisement
The Rear Panel
CC (VOLUME) Jack
CC (VOLUME) Jack
Use the CC (VOLUME) jack to connect a MIDI CC pedal (also known as a MIDI expression
or volume pedal). By default this pedal is assigned to control Program and Multi volume (pre-
FX).
For KB3 Organ Programs, the CC (VOLUME) pedal controls organ swell. Organ swell is
similar to Program volume, except volume can not be turned all the way down to silence. The
LCD display shows "KB3" when a KB3 Program is selected.
For User Multis, the CC pedal can be assigned to a different function for each Zone by using
Multi Edit Mode.
The optional Kurzweil CC-1 continuous control pedal will work best with the SP6, but it is
also possible to use third-party continuous control pedals designed for keyboards. Compatible
pedals should use a 10 kΩ linear-taper potentiometer, with a 1/4 inch tip-ring-sleeve (stereo)
plug with the wiper connected to the tip.
AUDIO OUT LEFT (MONO) and RIGHT Jacks
Use the AUDIO OUT jacks to connect to an amplifier or mixer. See
2
for details.
HEADPHONE Jack
Use the HEADPHONE jack located on the left rear panel of the instrument to listen to
the SP6 on stereo headphones. You will need a 1/8-inch-to-1/4-inch adapter in order to use
headphones that have a smaller mini plug connector.
When headphones are plugged in, audio is still transmitted from the AUDIO OUT jacks.
10
GETTING STARTED GUIDE
"Quick Start" on page
Advertisement
Table of Contents
