Siemens SIMATIC ET 200SP Manual page 31

BusAdapter BA 2xSCRJ
6.2 Connecting
Pin assignment
The following table shows the signal name and description of the pin assignment of
BusAdapter BA 2×SCRJ.
Table 6- 1
Procedure
1. Plug the BusAdapter BA 2×SCRJ into the PROFINET device.
2. Screw the BusAdapter BA 2×SCRJ to the PROFINET device (1 screw with 0.2 Nm
tightening torque). To do this, use a screwdriver with a 3 to 3.5 mm blade, alternatively
TX10.
3. Remove the blanking plugs from the PROFINET sockets.
4. Hold the prepared connector by the housing. Insert it into the PROFINET socket on the
BusAdapter BA 2xLC until you hear it click into place. The coding of the connectors
ensures a safe connection.
You can swap steps 3 and 4.
30
PROFINET IO pin assignment with BusAdapter BA 2×SCRJ
View
CAUTION
Risk of damage to eyes
Do not look directly into the opening of the optical transmitter diodes. The emitted light
beam damages your eyes.
Sig-
nal
name
①
Receive Data
②
Transmit Data
Description
BusAdapter
Manual, 03/2018, A5E41449003-AA