Siemens SIMATIC CP 440 Manual page 6

Preface
Additional Assistance
Please contact your local Siemens representative if you have any queries about
the products described in this manual. A list of Siemens representatives worldwide
is contained, for example, in the "Siemens Worldwide" Appendix of the manual
S7-400 Programmable Controller, Hardware and Installation .
If you have any questions or suggestions concerning this manual, please fill out the
form at the back and return it to the specified address. Please feel free to enter
your personal assessment of the manual in the form provided.
We offer a range of courses to help get you started with the SIMATIC S7
programmable controller. Please contact your local training center or the central
training center in Nuremberg, D-90027 Germany (tel. +49 911 895 3200).
Constantly Updated Information
You can obtain constantly updated information on the SIMATIC products on the
Internet at http://www.ad.siemens.de
In addition, SIMATIC Customer Support provides you with up-to-date information
and downloads that can be useful to you when using SIMATIC products:
On the Internet at http://www.ad.siemens.de/simatic-cs
Via the SIMATIC Customer Support Mailbox (German) at
or the SIMATIC Customer Support BBS (English).
The mailbox is best accessed with a modem up to V.34 (28.8 kbps) parameterized
as follows: 8, N, 1, ANSI, or via ISDN (x.75, 64 kbits).
You can contact SIMATIC Customer Support by phone at
by fax at
to the above-mentioned mailbox.
vi
49 (911) 895-7002. You can send questions by e-mail on the Internet or
Point-to-point connection CP 440 Installation and Parameter Assignment
49 (911) 895-7100
49 (911) 895-7000 or
A5E00057742-02