Thank you for choosing a Soleus Air powered by Gree Air Conditioner. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new air conditioner.
Recommended Ground Method For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a 3 prong power supply cord with a grounded plug. To minimize the possibility of electrical shock, the cord must be plugged into a 3 prong outlet and grounded in accordance with all local codes and ordinances.
If the air conditioner is to be installed in a window, you will probably want to clean both sides of the glass prior to in- stallation. If the windows is a triple-track type with a screen panel included, remove the screen completely before installation.
Before you start using your air conditioner, please familiarize yourself with the control panel and remote control the func- tions of each. This air conditioner can be controlled by the control panel (touch pad) or the included remote control. CONTROL PANEL (TOUCH PAD for cool only model)
Air Conditioner Features(continued) Signal transmitter Remote control ON/OFF ON/OFF button Press this button, the unit will be turned on, ● press it once more, the unit will be turned off. When turning on or turning off the unit, the Timer, Sleep function will be canceled, but the presetting time is still remained.
Air Conditioner Features(continued) Remote control + button For presetting temperature increasing. ● Press this button,can set up the temperature, when unit is on . Continuously press and hold this button for more than 2 seconds, the corresponding contents will be...
Air Conditioner Features(continued) Guide for operation- General operation 1. After powered on, press ON/OFF button, the unit will start to run.(Note: When it is powered off, the guide louver of main unit will close automatically.) 2. Press MODE button, select desired running mode, or press COOL or HEAT mode to enter into the corresponding operation directly.
Page 11
Air Conditioner Features(continued) TO TURN UNIT ON: TO CHANGE TEMPERATURE SETTING: Note: Tap or hold either up(^) or down(v) button until the desired temperature is seen on display. This temperature will be automatically maintained anywhere between 61F (16 C) and 86F (30 C) for both cooling and heating modes.
Page 12
Air Conditioner Features(continued) TO OPERATE ON FAN ONLY: Note: Use this function only when cooling is not desired, such as for room air circulation. You can choose any fan speed you prefer,EXCEPT AUTO FAN. During this function, the display will show the actual current temperature, not the set temperature as in the cooling mode.
Page 13
Air Conditioner Features(continued) HEATING FEATURE (on some models) Note: This feature can be used with any combination of FAN Speeds, Timer, or Sleep Modes. When in the “Heat” Mode, the fan will run continuously while heat is needed. The temperature will automatically be maintained anywhere between 61°F (16°C) and 86°F (30°C).
Winter Storage To store the air conditioner when it is not in use for an extended period of time, remove it care- fully from the window according to the installation instructions and cover it with plastic or place it in the original box.
TROUBLESHOOTING PROBLEM The Air Conditioner will not start The Air Conditioner does not cool as it should The Air Conditioner is freezing up The Remote Control is not working POSSIBLE CAUSES The air conditioner is unplugged The fuse is blown/circuit breaker is tripped.
Page 16
“F4” The Air Conditioner Display reads “FJ” POSSIBLE CAUSES Hot and Humid weather. The air conditioner is not correctly tilted outside. Moisture removed from the air is draining into the base pan. A Sensor has failed in the air conditioner...
One Year Limited Warranty Soleus International, Inc. warrants the accompanying Soleus Air Powered by Gree Air Conditioner to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States.