Soleus Air SG-PAC-12E1 Operating Instructions Manual page 12

REMOTE CONTROL OPERATING INSTRUCTIONS
REMOTE CONTROL
SLEEP
Press the SLEEP mode button to engage SLEEP
mode.. This feature limits compressor usage and
enhances energy savings by adjusting the set
temperature while you are sleeping. Press the SLEEP
button once more to disable Sleep Mode. Sleep Mode
is not available in Auto or Fan Modes.
In Cooling or Dehumidifier (DRY) modes: When sleep
mode is selected the set temperature will automatically
increase 2°F after 1 hour. After 2 hours, the set tempera-
ture will increase another 2°F for a total increase of 4°F.
In Heating mode (SG-PAC-12E1HP only): When sleep
mode is selected the set temperature will automatically
decrease 2°F after 1 hour. After 2 hours, the set tem-
perature will decrease another 2°F for a total increase of
4°F.
SLEEP BUTTON
X-FAN
X-FAN BUTTON
Press the X-FAN button to enable the X-Fan function.
When enable, X-Fan will force the fan to remain on once
the unit is powered down. The fan stays on to dry out any
remaining moisture in the unit to help minimize mold or
bacteria growth. X-Fan cannot be set under Auto, Fan, or
Heat (SG-PAC-12E1HP only) modes.
LOCK
LOCK FUNCTION
• Press "+" and "-" buttons together at the same time to
lock the remote keyboard. Do this again to unlock.
LIGHT
LIGHT BUTTON
Press the LIGHT button to turn the on the display Light.
A small Light bulb icon will light up on the remote con-
trol display.
AUTO
• Press the MODE button to select Auto Mode. Once
Auto Mode is selected the unit will automatically
choose the operating mode based on the current room
temperature. The temperature will not be displayed on
the LED in this mode.
TEMP
MEASURE
CHANGE BETWEEN F° and C°
• When the unit is off, press the MODE and "-" button
to change between F° and C°.
AUTO MODE
12