Table of Contents
Advertisement
REMOTE CONTROL OPERATING INSTRUCTIONS
REMOTE CONTROL
ON/OFF
Press the ON/OFF (POWER) button once to manually
turn the unit on. Press the Power button once more to
turn the unit off.
MODE
Press the MODE Button repeatedly to cycle between the
different modes.
SIGNAL TRANSMITTER
ON/OFF BUTTON
MODE BUTTON
AUTO
COOL
DRY
FAN
NOTE: Heat Mode is only
HEAT
available on SG-PAC-12E1HP
- / +
- / + BUTTONS
When the unit is in Air Conditioner or Heater (SG-PAC-
12E1HP) mode you can select your desired temperature.
Press the TEMP SELECT buttons (+ or -) to select
your desired temperature setting. The temperature on the
LCD display on the remote control will increase or de-
crease accordingly. Hold the +/- buttons for two seconds
to rapidly increase or decrease the temperature. Temp.
range is 61°F—86°F.
FAN
FAN BUTTON
Press the Fan Speed button to change fan speeds.
Fan Speeds:
Low Speed
High Speed
NOTE: When the unit is in Dehumidifier (DRY) mode,
the fan speed is not adjustable.
Vertical Swing BUTTON
Press the Up and Down Swing Button to turn on and off
the vertical swing mode. In vertical swing mode, the lou-
vers will rotate up and down to circulate more air.
When the unit is off, press the Up and Down Swing But-
ton and "+" at the same time to enable stationary swing
mode. Stationary Swing mode allows for more control
over the way the louvers swing up and down. The Swing
icon on the Remote LCD will blink twice when this is
Blinks for 2 Seconds
In Stationary Swing mode, press the Up and Down
Swing Button to change the swing pattern per below:
Disable Stationary Swing Mode by pressing the Up and
Down Swing Button and "+" button at the same time.
The Swing Icon on the Remote LCD will blink twice
when this is disabled.
Medium Speed
10
Hide quick links:
Advertisement
Table of Contents
