Steps To Operate The Ups; Table 6-1. Ups Menu Structure - Eaton 93PR Series User And Installation Manual

6.2

Steps to Operate the UPS

Table 6-1: UPS Menu Structure
Main menu
Home
Meters
Mimics
Logs
Statistics
Settings
Submenu Functions
An overview of UPS operation, including information on load,
-
efficiency and consumption.
Meters summary A summary of the UPS or sys-tem meters.
Input meters Detailed information on UPS or system input meters.
Bypass meters Detailed information on UPS or system bypass meters.
Output meters Detailed information on UPS or system output meters.
Battery meters Detailed information on UPS or system battery meters.
An overview of UPS operation, including information on load,
efficiency and consumption. If there is an error, an error indi-cator is
UPS mimic
displayed next to the affected part. Active events log can be opened
by tapping the error indicator.
UPS module map Module map shows the status of each UPM.
System overview shows the status and meters summary for each
System overview
UPS.
ESS mimic screen shows the approximated consumption and
ESS
energy savings of ESS mode.
Active events All active events are displayed.
System log A log of all system events.
Service log A detailed log of UPS opera-tions.
Change log A log of all changed settings and their values.
Statistics summary A summary of UPS statistics.
Statistics details Details are available by press-ing on different statistics.
System controls Go to bypass, Load Off / Start system
UPS controls Start charger, Run battery test, Shut down UPS / Start UPS
Module controls Start charger, Run battery test /Shut down module / Start mod-ule
Enable / Disable / Configure ESS, Enable / Disable / Config-ure
Service controls VMMS, Enable / Disable /Configure ABM, Clear status, Clear alarms,
Clear logs
Configurable user settings. See Chapter 11 APPENDIX A: User
Setting group
settings on page 84 for de-tails.
25-75 kW
User's and Installation Guide 60