11. FLOAT SWITCH
[a] KM-40B, KM-55B
1) Unplug the icemaker or disconnect the power source.
2) Remove the Top Panel and unscrew the Rear Panel.
3) Disconnect the Connector of the Float Switch lead and remove the lead wire from
the Grommet through the slit.
4) Remove the Water Tank (see "V. 15. WATER TANK").
5) Remove the screw securing the Float Switch.
6) Install the new Float Switch in the reverse order of the removal procedure.
7) Refit the panels in their correct positions.
8) Plug in the icemaker or connect the power source.
Slit
Grommet
Fig. 11
Mounting Screw
57
Float Switch
* Attach to three arrowed
surfaces when fixing
with screw