13. REMOVAL AND REPLACEMENT OF FLOAT SWITCH
1) Go through the steps 1) through 6) in "14. REMOVAL AND REPLACEMENT OF PUMP
MOTOR."
2) Remove the connectors of the Float Switch.
3) Remove the screw and the Float Switch Bracket.
4) Remove the two screws and the Float Switch.
5) Take off the Hose sleeving the Float Switch leads.
6) Sleeve the leads of the new Float Switch with the Hose.
7) Install the new Float Switch, and replace the removed parts in the reverse order of
which they were removed.
8) If the unit is equipped with a plug, plug it in. Turn on the power supply.
42