Lan Ip Address - ActionTec GT701 User Manual

The Unnumbered Mode feature automatically configures the appropriate
ing for the Address block. The
IP
-to-
to be routed WAN
☞
Note: The
when purchasing a block of public static
ISP
the if this information was not received.
ISP
VIP Mode - This feature is used in conjunction with Unnumbered Mode. When
Mode is activated, the Modem uses
VIP
network ( ), allowing both public
LAN
configured to the
LAN
addressing. All computers using public
IP
have the public addresses statically assigned. Enter the static IP address in the text
IP
boxes below "Unnumbered IP Address. "
After configuring your settings, click Next, then click Save and Restart to make all
changes permanent.

LAN IP Address

Selecting LAN IP Address in the "Configuring the Advanced Settings" screen gen-
erates the "
LAN IP
The values in the "Device
the address and subnet mask of the Modem as seen on the network. These val-
IP
ues can be modified for your
default factory settings (
Chapter 4 Using Advanced Setup
route will bypass
IP
, as well as
LAN LAN
Address information should be obtained from the
IP
IP
simultaneously, while the
Address" screen.
Address" and "Device
IP
network, but Actiontec recommends keeping the
LAN
address
IP 192.168.0.1;
NAT
-to- .
WAN
IP
for private
NAT IP
addressing and private
server is reserved for private
DHCP
addresses with Unnumbered Mode must
IP
Netmask" text boxes are
LAN
subnet mask
39
IP
, enabling the public
address. Contact
addressing for the local area
addressing to be
IP
).
255.255.255.0
rout-
s
IP