ActionTec GT701 User Manual page 39

Actiontec USB/Ethernet DSL Modem User Manual
Obtain an IP Address through PPPoE or PPPoA
Select one of these options to allow the Modem to use the Point-to-Point over
Ethernet ( ) or Point-to-Point over
PPPoE
"Broadband Connection via PPPoE" screen:
"Broadband Connection via PPPoA" screen:
If a User Name, Password and/or Static
it should be displayed in the "Broadband Connection via
not, enter the information now. If the information is unavailable, contact the
PPP Auto Connect
auto connect is activated (by clicking in the appropriate check box), the
If
PPP
Modem will attempt to automatically redial the
or disconnected during an online session. Actiontec recommends activating
Auto Connect.
( ) protocol.
ATM PPPoA
was entered in the Installation Buddy,
IP
PPPoE/PPPoA
connection if it is dropped
PPP
36
" screen. If
.
ISP
PPP