ActionTec GT701 User Manual page 40

Encapsulation (PPPoA only)
Select one of the encapsulation options, based on information received from
the .
ISP
Obtain an IP Through DHCP
Select this option if the
(used for configurations without a static
Modem will query the
will terminate at the Modem, as opposed to the
being bridged to terminate at the computer. This allows the use of the router capa-
bilities for the Local Area Network (
Some s need to authenticate their end users with a Host Name and/or Domain
ISP
Name. If this is the case, check with the
enter them in the appropriate text boxes in the "Broadband Connection via
screen. If the does not require these settings, leave the text boxes blank.
ISP
☞
Note: Contact the
Chapter 4 Using Advanced Setup
service is configured to use
IP
IP
to receive the
ISP IP
).
LAN
ISP
if unsure of the proper configuration.
ISP
RFC 1483
assigned by an
ISP
address and routing information, which
address and routing information
IP
for a host name and domain name and
37
Bridged or Routed
). In this mode, the
DHCP
"