4358-5405 Can Scenera
12/8/10
C-6 Reclining Restraint System
1
2
25
2:50 PM
Page 27
This restraint system has 2
recline positions:
Rear-facing - Recline
stand MUST be folded
under infant restraint (2).
Forward-Facing - Recline
stand MUST be in the upright
position (1).
To Recline
For reclined position, pull
down to unlock recline stand
and fold under seat.
For upright position, pull
recline stand out from under
seat and push up to lock in
place.
C-7 Removing Harness System
1.
Unhook Harness Straps
from Splitter Plate
Fully loosen harness straps.
Starting in the back of the
restraint system, unhook
harness strap loops from
splitter plate.
2.
Remove Harness
1
Straps
From the front, pull
2
harness straps through
the upper harness slots
and harness covers (1).
3
Unthread harness straps
from the chest clip (2).
4
Unthread harness from
the buckle tongues (3).
Holding one harness
strap, pull harness
completely out of lower
harness slots (4).
3.
Locate Buckle/Crotch
Strap's Metal Retainer
Turn the restraint system
over and locate the
buckle/crotch strap's
metal retainer.
26
continued on next page.