Dorel Juvenile Group Scenera Instructions Manual page 12

4358-5405 Can Scenera 12/8/10
C-4 Removing Child From Restraint System
1.
2.
3.
21
2:50 PM Page 23
Loosen Harness Straps
Push in on the harness
adjustment lever under the
flap. Pull out on harness
straps just above buckle
tongues.
Release Chest Clip
Push in the release button
and pull apart.
Unbuckle Harness
Press down on the red
buckle release button to
release the buckle tongues.
Place harness straps over
sides of restraint system
and remove the child.
C-5 Accessories for Select Models
Install Cup Holder
(on select models)
Cup holder can be on either
side.Pull pad off corner. Hook
top of cup holder to edge of
plastic shell. Snap bottom of
cup holder under edge of
shell. Replace pad.
Harness Covers
(on select models)
The harness covers help to
provide comfort to the
infant's neck. For harness
covers to fit correctly you
may have to push the ends
of the covers through the
upper harness slots. To
remove the harness covers you will have to; unhook the
harness straps from splitter plate, pull harness straps out of
the upper harness slots and remove harness covers.
Rethread harness straps and re-hook the harness strap loops
to the splitter plate (review step 7 in section C-2).
Head Pillow
(on select models)
The pillow provides extra
comfort for your toddler. To
remove pillow, unhook the
harness straps from splitter
plate, pull harness straps
out of the upper slots and
remove pillow. Rethread harness straps and re-hook the
harness straps loops to the splitter plate (review step 7 in
section C-2).
22
continued on next page.