Configuring The Drive Units - Siemens SINAMICS S120 Getting Started

4.2

Configuring the drive units

In this chapter, a link is established between the connected drive unit and the
S120_CU320_2_DP, and the drive unit is configured for operation.
Sequence
1. In the project navigator, click on the "+" symbol before the entry "S120_CU320_2_DP".
2. Double-click on option "Automatic configuration" in the project navigator.
3. Click on button "Configure".
Getting Started
Getting Started, 11/2009, 6SL3097-4AG00-0BP0
A list of the drive units in this drive train is displayed.
The following information window is displayed:
Configuring your drive project
23