Settings; Sound Settings; Volume Settings; Adjusting The Phone's Volume - Sanyo SCP2700 Operating Manual

Settings

Sound Settings

Volume Settings

Adjusting the Phone's Volume

You can adjust your phone's volume settings to suit your needs and your environment.
► Press the volume key on the side of your phone up and down in standby mode.
- or -
1. Press MENU/OK > Settings/Tools > Settings > Sounds > Volume.
2. Select Ringer, Earpiece, Headset, Speakerphone, Applications, or Start Up/Power Off.
3. Select a volume level and press DONE (left softkey).

Adjusting the Alert Volume

You can set the alert volume separately from the ringer volume setting.
1. Press MENU/OK > Settings/Tools > Settings > Sounds > Volume > Advanced....
2. Select Alarms, Message, Voicemail, Voice SMS or Email.
3. Select Separate Volume.
Tip: You can make the ringer vibrate at any volume level by checking the box next to Always
Vibrate.
4. Press the navigation key left or right to choose a volume level, and press DONE (left
softkey).

Silence All

The Silence All option allows you to mute all sounds without turning your phone off. The screen
will display "Silence All" when the feature is activated.
To activate Silence All:
► Press the volume key down repeatedly in standby mode.
To deactivate Silence All:
► Press the volume key up repeatedly to select a volume level.

Ringer Types

Ringer types help you identify incoming calls and messages. You can assign ringer types to
individual Contacts entries, types of calls and types of messages.

Selecting Ringer Types for Incoming Calls

1. Press MENU/OK > Settings/Tools > Settings > Sounds > Ringer Type > Incoming
Calls.
Select Default Ringer, Contact Entries, or Unknown #s.
2.
Select All Contacts or One Contact when Contact Entries is selected.
3. Select an option and press MENU/OK.
4. Select an available ringer and press MENU/OK.
19