28 Press MARKER to activate the analyzer's marker 1. Use the front panel knob to
29 Write the maximum values on the "Performance Test Record."
In Case of
Difficulty
1 Suspect the A10 digital IF board assembly if the analyzer fails both test port
2 Refer to the Agilent 8753D Service Guide for more troubleshooting
Performance Tests
13. Test Port Receiver Magnitude Dynamic Accuracy
Figure 4-29. Test Port 1 Input Impedance Test Setup
locate the maximum value of the data trace for each of the frequency ranges
listed in the "Performance Test Record."
tests.
information.
13. Test Port Receiver Magnitude Dynamic Accuracy
Perform this procedure to measure the magnitude dynamic accuracy for each
input test port.
4-48