Olivetti ECR 2500 Euro Instruction Manual page 33

Personalizing EURO and Local Captions
By default the cash register prints one of two programmable convert
captions to indicate a converted sales transaction total on the receipt
and journal report; if the cash register is programmed with a Local base
currency, the convert caption printed is "EURO" while if it is pro-
grammed with a Euro base currency, the convert caption printed is
"LOCAL". If an exchange rate has been defined, the amounts indicated
in both cases are the sales totals converted into the respective currency.
If an exchange rate has not been defined, by default the cash register
assumes a 1:1 conversion rate.
If you wish to avoid printing the Local or Euro converted sales total
and just print the transaction total of the base currency, program the
cash register to do so as indicated in the section entitled Programming
System Options, Machine Condition 30.
If you have programmed the cash register for a Euro base currency,
proceed as follows to change the LOCAL caption printed:
1. Turn the PRG key to the PRG position.
2. Type [41] and then press the [return] key. The caption "LOCAL"
appears on the operator display.
3. With reference to the Character Code Table in the Appendix or by
using the alphanumeric keypad, define the new caption (max 10
characters, spaces included). Remember that you can use the [void]
key as backspace function if an error is made during caption entry.
4. Press the [check/valid] key to confirm the new caption which is
automatically printed.
Example: Change the caption LOCAL to UK POUNDS by using the
alphanumeric keypad.
Type/Press:
[41] + [return] + [dept shift] [dept. 1/21] + [dept. 11/31] + [00] +
[dept. 16/36] + [dept. 15/35] + [dept shift ] + [dept. 1/21] +
[dept. 14/34] + [dept. 4/24] + [dept. 19/39] + [check/valid]
26
You can proceed in the same way to change the EURO convert
caption printed when the Local base currency is programmed. In this
case the only difference is that you need to type [42] in step 2 and the
caption "EURO" appears on the operator display; you can then program
whatever caption you wish as long as it is up to 10 characters long.
Personalizing the Net Converted Caption
The machine's default net converted caption "CNV.NET" indicating
the net sales total exchanged into a programmed currency (either your
local currency or EURO, depending on the machine's programmed base
currency) at the currency exchange rate defined and that is printed on
the financial and management reports, can be personalized accordingly.
If the cash register is in its default base currency mode and you wish
to personalize the CNV.NET caption of the financial and management
report to identify the converted EURO value, proceed as follows:
1. Turn the PRG key to the PRG position.
2. Type [43] and then press the [return] key. The caption
"CONV.NET" appears on the operator display.
3. With reference to the Character Code Table in the Appendix or by
using the alphanumeric keypad, define the new caption (max. 10
characters, spaced included). Remember that you can use the [void]
key as backspace function if an error is made during caption entry.
4. Press the [check/valid] key to confirm the new caption which is
automatically printed.
Example: Change the caption CNV.NET to EURO NET by using the
alphanumeric keypad.
Type/Press:
[43] + [return] + [dept. 5/25] + [dept. shift] + [dept. 1/21] +
[dept. 18/38] + [dept. 15/35] + [00] + [dept. 14/34] + [dept. 5/25] +
[dept. 20/40] + [check/valid]