Table of Contents
Advertisement
6. Programmable Features
Feature/Code
Setting the recording paper
type for manual input tray
MBNM3NM8NM4N
Setting the waiting time for
the power save mode
MBNM4NM0NM3N
Holding the previous contrast
setting
MBNM4NM6NM2N
Viewing the counter for
departments
MBNM4NM7NM9N
Setting toner save feature
MBNM4NM8NM2N
40
Selection
M1N "PLAIN PAPER" (default): 75 g/m
M2N "THIN PAPER": 64 g/m
Note:
R This setting will be deactivated when printing from a computer. To set the
recording paper type for printing, see page 23.
To set the length of time before the unit enters power save mode.
M1N "1min" (default): 1 minute
M2N "5min": 5 minutes
M3N "15min": 15 minutes
M4N "30min": 30 minutes
M5N "1h": 1 hour
Note:
R When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
M0N "DISABLED" (default): Deactivates this feature.
M1N "ENABLED": The unit will hold the previous setting.
Note:
R The previous setting will be held individually for copying.
See page 52 for details.
M0N "OFF" (default): Deactivates this feature.
M1N "ON": The toner cartridge will last longer.
Note:
R This feature may lower the print quality by reducing toner consumption.
R This setting is valid for copying, and when the unit prints reports/lists.
2
to 90 g/m
2
paper.
2
2
to 75 g/m
paper.
Advertisement
Table of Contents
