Table of Contents
Advertisement
4. Scanner
4.1 Scanning from the unit (Push
Scan)
You can easily scan the document by using the operation
panel on the unit. You can select one of the following
scanning modes depending on how you intend to use the
scanned image.
Scanning mode
"VIEWER"
Viewing using Multi-Function
Viewer/Quick Image Navigator
(Scan to Multi-Function
Viewer/Quick Image
Navigator)
"FILE"
Saving as a file to your
computer (Scan to save as a
file)
"EMAIL"
Activating the default email
software on your computer,
then attaching the scanned
image as a file (Scan to email)
"OCR"
Opening the scanned image
using OCR software (Scan to
OCR)
"EMAIL
Sending as an attached file to
an email destination directly
*1*2
ADDRESS"
from this unit (Scan to email
address)
"FTP
Sending to an FTP server
(Scan to FTP server)
*1*3
SERVER"
"SMB
Sending to an SMB folder
(Scan to SMB folder)
*1*4
FOLDER"
*1 LAN connection only.
*2 Program the email server settings (page 43) and
the email destinations (page 44, 53) beforehand.
*3 Program the FTP server settings beforehand
(page 44).
*4 Program the SMB folder settings beforehand
(page 44).
Note:
R When scanning a document, we recommend using
the scanner glass rather than the automatic
document feeder for better results (KX-MB2011
only).
R Do not open the document cover when scanning a
document with the automatic document feeder
(KX-MB2011 only).
26
R You can set the desired scan mode for push scan
beforehand (feature #493 on page 43).
MScanN
MSetNMCNMDNMEN
1
Set the original (page 16).
2
If the MScanN light is OFF, turn it ON by pressing
MScanN repeatedly.
3
Press MCN or MDN repeatedly to select a scanning
mode. A MSetN
4
USB connection:
Press MCN or MDN repeatedly to select "USB HOST".
A MSetN
LAN connection:
Press MCN or MDN repeatedly to select the destination
to which you want to send the scanned image. A
MSetN
R When scanning to email address, you can
enter the destination email address using dial
keypad (page 49).
5
If necessary, change the scanning settings. Press
MEN, press MCN or MDN repeatedly to select the desired
setting. A MSetN
6
When using the scanner glass:
MStartN A The unit will scan 1 page. Place the next
document on the scanner glass and press MSetN.
Repeat this until all the documents are scanned, then
press MStartN.
When using the automatic document feeder
(KX-MB2011 only):
MStartN
7
After you finish scanning, press MStopN to reset the
setting you set in step 5.
Note:
R To stop scanning, see page 51.
MStartN
MStopN
Advertisement
Table of Contents
