Table of Contents
Advertisement
6.1 Programming
1
MMenuN
2
Press MBN and the 3-digit code (page 38 to
page 47).
3
Press the appropriate selection to display the desired
setting.
R This step will vary depending on the feature.
4
MSetN
5
Press MMenuN to exit.
To select features through the web browser interface
(LAN connection only)
You can change features through the web browser
interface instead of the unit.
1. Start Multi-Function Station. A [Utilities] A
[Configuration Web Page]
R You can also access the unit by entering its IP
address on the web browser.
2. Select the desired category from the menu bar.
[Device]: features of the unit
[Network]: network features
3. Type "root" as the user name, then enter the
password (feature #155 on page 38). A [OK]
4. Select the desired feature from the menu.
5. Change the settings or edit the information.
R This step will vary depending on the feature.
6. [Submit]
R The new setting will be transferred to the unit.
7. Close the web browser.
Note:
R The settings displayed in the web browser will be
updated by clicking [Reload].
MMenuN
MSetN
6. Programmable Features
37
Advertisement
Table of Contents
