Firmware Upgrade; Reset - Hawking HWBA54G User Manual

Wireless-g access point/bridge

Hide thumbs Also See for HWBA54G:

Table of Contents

3.2.8 Firmware Upgrade

This page allows you to upgrade the Access Point's firmware.

Parameter

Firmware Upgrade

Once you've selected the new firmware file, click Apply button at the bottom of the screen to start the upgrade

process. (You may have to wait a few minutes for the upgrade to complete). Once the upgrade is complete you

can start using the Access Point.

You can reset the Access Point's system should any problem exist. The reset

function essentially Re-boots your Access Point's system.

HWBA54G – Wireless-G Access Point / Ethernet Bridge

Description

This tool allows you to upgrade the Access Point's system firmware. To

upgrade the firmware of your Access Point, you need to download the

firmware file to your local hard disk, and enter that file name and path in

the appropriate field on this page. You can also use the Browse button to

find the firmware file on your PC. Please reset the Access Point when the

upgrade process is complete.

Table of Contents