Hawking HWBA54G User Manual page 37

Key 1 - Key 4
Click Apply button at the bottom of the screen to save the above configurations. You can now configure
other advance sections or start using the Access Point.
802.1x only
IEEE 802.1x is an authentication protocol. Every user must use a valid
account to login to this Access Point before accessing the wireless LAN. The
authentication is processed by a RADIUS server. This mode only
authenticates user by IEEE 802.1x, but it does not encrypt the data during
communication. You can use 802.1x without encryption in "AP mode" and
"AP Bridge-WDS mode."
HWBA54G – Wireless-G Access Point / Ethernet Bridge
it in the "Default key" will take effect.
The WEP keys are used to encrypt data transmitted in the wireless
network. Fill the text box by following the rules below.
64-bit WEP: input 10-digit Hex values (in the "A-F", "a -f" and "0-9" range)
or 5-digit ASCII character as the encryption keys.
128-bit WEP: input 26-digit Hex values (in the "A-F", "a-f" and "0-9"
range) or 10-digit ASCII characters as the encryption keys.
32