Hawking HWBA54G User Manual page 39

Wireless-g access point/bridge
Hide thumbs Also See for HWBA54G:
Table of Contents

Advertisement

For the WEP settings, please refer to section "WEP only". For the 802.1x
settings, please refer to section "802.1x only".
Click Apply button at the bottom of the screen to save the above configurations. You can now configure
other advance sections or start using the Access Point.
WPA pre-shared key
Wi-Fi Protected Access (WPA) is an advanced security standard. You can
use a pre-shared key to authenticate wireless computers and encrypt data
during communication. It uses TKIP or CCMP (AES) to change the encryption
key frequently, making it hard for hackers to crack the key. WPA is more
secure than WEP encryption. You can use WPA pre -shared key encryption in
"Access Point mode", "Ethernet Bridge - Ad Hoc mode", "Ethernet Bridge -
Client mode" and "AP Bridge-WDS mode."
Parameter
WPA(TKIP)
WPA2(AES)
HWBA54G – Wireless-G Access Point / Ethernet Bridge
Description
TKIP can change the encryption key frequently to enhance the wireless
LAN security.
This use CCMP protocol to change encryption key frequently. AES can
provide high level encryption to enhance the wireless LAN security.
34

Advertisement

Table of Contents
loading

Table of Contents