Table of Contents
Advertisement
How to Change the IP Address
Method 1: Direct Connect
1.
Select the Main Menu icon
2.
On the INTERNET (TCP/IP) section on the screen, enter the IP Address in the ETH 0 IP Address field.
Method 2: USB Port
1.
Create a "network.txt" with your desired settings (Figure 7):
2.
Save to the root folder of a thumb drive. Insert the thumb drive into the USB port of Site Supervisor.
3.
Power cycle the Site Supervisor. The new IP Address will be saved.
Document Part # 026-4144 Rev 8
©2018 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emerson.com for the latest technical documentation and updates.
> Configure System > General System Properties > Network Settings:
Figure 8 - Enter IP Address in the ETH 0 IP Address Field
Figure 9 - Network.txt Notepad
Page 4 of 10
Advertisement
Table of Contents
