PACSystems™ RX3i DNP3 Outstation User Manual
GFK-3103B
2.2.2
Ethernet IP Address Configuration
CPE400/CPL410
1. Expand Hardware Configuration and expand PACSystems CPE400.
2. Right-click Ethernet and select Configure.
3. In the Settings tab, enter the required IP address, Subnet Mask and Gateway parameters as
Figure 9: Configuring the Ethernet IP Address
CPE115:
1. Expand Hardware Configuration and expand PACSystems CPE115.
2. Right-click Ethernet and select Configure.
3. Enter the required IP address, Subnet Mask and Gateway parameters as shown in Figure 10.
Figure 10: Configuring the Ethernet IP Address CPE115
Configuration of DNP3 Outstation
shown in Figure 9.
Section 2
June 2020
16