Advertisement
Available languages
Available languages
Step Two: Install the 802.11g 54Mbps USB Adapter to your com-
puter.
When you are prompted, insert the 802.11g 54Mbps USB Adapter
into an available USB port on your computer.
Note: Make sure the 802.11g 54Mbps USB Adapter is fully inserted into the USB port on
your computer so that the 802.11g 54Mbps USB Adapter is detected.
Select your country. Windows will detect the new hardware. If prompted for the location of the driv-
ers, select Install the software automatically (Recommended) and click Next.
Follow the on-screen instructions to complete the installation procedure.* If you are prompted,
restart your computer.
*Note: You may receive a "Digital Signature Not Found" or "Windows Logo testing" screen.
Click Yes or Continue Anyway. U.S. Robotics has thoroughly tested this driver in conjunc-
tion with the supported hardware and has verified compatibility with Windows 2000, Me,
and XP. Because U.S. Robotics wants its customers to take full advantage of the network adapter's
functionality, it has made the drivers available.
Note: If you are prompted at any time for your Windows Operating System CD-ROM, remove
the U.S. Robotics Installation CD-ROM and insert your Windows CD-ROM into the CD-ROM
drive. When all of the files are copied, remove the Windows CD-ROM, and reinsert the U.S.
Robotics Installation CD-ROM.
3
Advertisement
