802.11G 54Mbps Usb Adapter Installation - US Robotics USR5422 Installation Manual

802.11g 54Mbps USB Adapter Installation

Prepare for Installation
It is important that you have your serial number written down before you install the 802.11g
54Mbps USB Adapter. You can find your serial number on the 802.11g 54Mbps USB Adapter. If you
ever need to call our Technical Support department, you will need this number to receive assis-
tance.
.
Model Number
USR5422
Note: For the most updated information, visit: http://www.usr.com/support
Turn on your desktop or laptop computer. Type your password if you are prompted to do so.
Note: Be sure to find out what letter your CD-ROM drive uses before you begin installing
your new product. You will need to know this to properly install your software.
Note: During the Installation procedure, you may be prompted for your Windows Operating
system CD-ROM. Make sure you have it available in case you need it.
Note: If the 802.11g 54Mbps USB Adapter does not fit into an available USB port on your
computer because of other USB devices that are connected, use an USB extension cable or
a USB hub to connect the 802.11g 54Mbps USB Adapter.
Note: If you are connecting the 802.11g 54Mbps USB Adapter to a 1.1 USB port, you may
see a message informing you that a Hi-Speed USB device is being connected to a USB port
that is not Hi-Speed. This will not affect the installation procedure.
Serial Number
1