press the appropriate Breaker to reset
the Generator and continue operation.
(See Figure F.)
FIGuRE F
AC
CIRCuIT BREAKER
Calculating Power draw:
1.
Power draw can be calculated by mul-
tiplying volts and amps. The resulting
number is wattage.
•
Never exceed the rated maximum
wattage (1300) for the Generator or
either outlet.
•
Refer to appliance/tool owner's
manuals to determine the wattage of
electrical load devices.
•
Long power cords and extension
cords draw additional power. Keep
cord length at a minimum.
(See Figure G.)
SKU 66523
For technical questions, please call 1-800-444-3353.
dC
CIRCuIT BREAKER
FIGuRE G
AC Application:
1.
Allow the Engine to run at no load
until warm (approx. 3 minutes) after
each start-up to allow the Engine to
stabilize.
2.
Plug the power cord of the 120 volt
appliance/tool into the 120 volt AC
Outlet on the Generator.
(See Figure H.)
3.
When finished using the appliance/
tool, unplug its power cord from the
AC Outlet on the Generator.
(See Figure H.)
FIGuRE H
AC OuTLET
dC OuTLET
Page 11