Miscellaneous Specifications; Shipping Weights; Repairs And Replacement; Element Styles Available On Series A19 - Johnson Controls A19 Series Manual

Packing Nut: Part No. FTG13A-600R is available for
closed tank applications where the temperature does
not fall below -35°F (-37°C) or exceed +250°F
(121°C). Maximum liquid pressure limit is 150 psig
(1034 kPa). For applications where the temperature
or liquid pressure exceeds these limits specify Style 4
element with all metal packing nut as an integral part
of the control.
Range Adjustments: Concealed dial with
screwdriver slot (plain cover), exposed dial with
screwdriver slot, dial and knob adjustment or models
with factory sealed setting may be supplied.
Ranges: For ranges other than those shown in
"Specifications" table, contact Customer Service.
Sealed Stop: Available at extra cost.

Miscellaneous Specifications

Case: .062 in. cold rolled steel. Gray baked enamel
finish.
Cover: .025 in. cold rolled steel. Gray baked enamel
finish.
Contact Unit: Precision Pennswitch. Snap acting
dust-tight contacts.

Shipping Weights

Shipping weights shown below are approximate.
Weights vary depending upon construction.
Generally, overpack will contain 25 individually
packed controls.
Individual pack: 1.0 lb.
Overpack containing 25 individually packed units:
26.0 lbs.
Fig. 3: Element Styles available on Series A19

Ordering Information

1. Specify Product Number only, if available (see
the "Specifications" chart).
2. If Product Number is not available specify Type
Number.
a. Capillary length.
b. Range.
c. Bulb style.
d. Bulb well, if required.
e. Packing nut, if required.
f. Any other miscellaneous specifications.

Repairs and Replacement

Repairs must not be made in the field other than
replacement of the cover, well assembly and packing
nut assembly. When ordering replacement parts,
give Product and Serial Numbers. Controls requiring
attention should be returned to the factory or nearest
Johnson Controls representative for inspection and
service.
A19 Product Bulletin 3