Accessing The Web Application - Shure MXA910 Manual

Shure Incorporated
4. To identify devices, click the product icon to flash the lights on a device. Select your device in the list and click
Configure to open the device's configuration window.
Learn more and download at www.shure.com/designer (http://www.shure.com/designer).

Accessing the Web Application

The Shure Web Server Discovery application finds all Shure devices on the network that feature a web-based
GUI. Follow these steps to install the software and access the web application:
① Install the Shure Discovery application
Download and install the Shure Discovery application from www.shure.com. This automatically installs the required
Bonjour device discovery tool on the computer.
② Connect the network
Ensure the computer and the hardware are on the same network.
③ Launch the Discovery application
The app displays all Shure devices that feature a GUI.
④ Identify the hardware
Double-click on a device to open its GUI in a web browser.
⑤ Bookmark the device's web application (recommended)
Bookmark the device's DNS name to access the GUI without the Shure Discovery app.
Web Application Browser Compatibility
The web application is compatible with all HTML5-supported browsers. To ensure the best performance, disabling
hardware acceleration and unused plug-ins is recommended.
Accessing the Web Application without the Discovery App
If the Discovery application is not installed, the web application can be accessed by typing the DNS name into an
internet browser. The DNS name is derived from model of the unit, in combination with the last three bytes (six dig­
its) of the MAC address, and ending in .local.
Format Example: If the MAC address of a unit is 00:0E:DD:AA:BB:CC, then the link is written as follows:
MXA910: http://MXA910-aabbcc.local (http://SCM820-DAN-aabbcc.local)
Using A Password
All settings are configurable by default. To protect settings with a password, open the Settings menu and select the
General tab. In this screen, passwords can be created or changed.
Once a password has been set, a Read-Only option appears on the log-in screen. In Read-Only mode, device pa­
rameters can be viewed, but not edited. Device identification remains active.
35/87