Configuring Power Management Settings - Dell Latitude ATG D620 User Manual

Using a Battery: Dell Latitude ATG D620 User's Guide
completely turning off the computer. When the computer exits hibernate mode, it returns to the same
operating state it was in before entering hibernate mode.
NOTICE: You cannot remove devices or undock your computer while your computer is in
hibernate mode.
Your computer enters hibernate mode if the battery charge level becomes critically low.
To manually enter hibernate mode:
Click the Start button, click Turn off computer, press and hold <Shift>, and then click
Hibernate.
or
Depending on how you set the power management options on the Advanced tab in the Power
Options Properties window, use one of the following methods to enter hibernate mode:
Press the power button.
Close the display.
Press <Fn><Esc>.
or
Press <Fn><F1> if you have used the QuickSet program to set this keyboard shortcut (see
Dell™ QuickSet
NOTE: Some PC Cards or ExpressCards may not operate correctly after the computer exits
hibernate mode. Remove and reinsert the card (see
computer.
To exit hibernate mode, press the power button. The computer may take a short time to exit hibernate
mode. You cannot make the computer exit hibernate mode by pressing a key or touching the touch pad
or track stick. For more information on hibernate mode, see the documentation that came with your
operating system.

Configuring Power Management Settings

You can use the QuickSet Power Management Wizard or Windows Power Options Properties to configure
the power management settings on your computer.
file:///H|/My%20Documents/Cellular/User%20Guides/Notebooks/D620%20ATG/battery.htm (6 of 9)4/13/2007 4:36:30 PM
Features).
Card Types), or simply restart (reboot) your