Battery Installation & Charging - AT&T E2116 User Manual

Getting Started
Battery installation & charging
After battery installation, place the handsets in the base unit or charger and allow to
charge for at least 16 hours before use.You can keep the batteries charged by returning
the handsets to the base unit or charger after each use. Recharging of a fully depleted bat-
tery may take up to 14 hours. A fully charged battery could provide up to 5 hours of talk
time, or 8 days of standby time. Actual battery life depends on usage condition and age of
battery.
Press tab to open
battery compartment.
Plug charger power
cord into jack on under-
side of charger, then
plug power adaptor into
electrical outlet.
NEEDS RECHARGING
Low battery indicator.
Return handset to base
or charger to recharge
when this symbol flashes.
(Handset will beep when
battery is low.)
Caution: Use only the supplied
rechargeable battery or AT&T
replacement battery model 3301 (SKU
23403, Part number 80-5071-00-00).
7
Insert supplied bat-
tery. Ensure the plug
on the battery pack is
securely inserted into
the socket of the com-
partment according
to the colour-coded
label.
Replace compartment cover.
Place handset in base or charger
to charge for at least 16 hours
before first use.
MUTE CHAN REDIAL