AT&T E2116 User Manual page 28

Caller ID Logs
To review the call log
To store from the Caller ID Log into the directory
• Press on the cordless handset to activate the caller ID log.
• Press or on the cordless handset to scroll to the desired number to be stored.
• If you wish to change how the number is stored, press #. The screen displays all
alternate dialing sequences available for this call (area code + number; 1 + area code
+ number; number only, 1 + number). See the note in the section above on changing
the dialing sequence.
• Press , then press
SELECT
• Press three times. The screen displays:
MENU
SELECT
• Press or to select
• Press . A beep tone will sound to confi rm your choice. If you choose
SELECT
the previous step, a
D
To delete an entry
• Press on the handset to activate the caller ID log.
CID
• Press the arrow or
deleted.
• When the desired record is displayed on the LCD screen, press
record and a confi rmation beep will sound.
• The subsequent call entry will be advanced to that call number.
NOTE: Deleting an incoming call record on one cordless handset does not automatically delete the same record
from other handsets.
NOTE: When an entry is deleted, the next oldest record is displayed.
To delete all Caller ID records
• With the handset in the idle (off) mode, press
caller ID log.
• Press and hold on the handset for 1.5 seconds or longer to clear all entries in
DEL
the CID Log of the unit.
• The message
ERASE ALL NO YES
either or fl ashing, asking you to confi rm that you want to delete all entries
NO YES
in the CID Log.
• If you select , the call log will be cleared and the screen will return to the nor-
YES
mal standby display, showing new and old calls both as 00.
• Press until fl ashes.
YES
• Press and a beep tone will confi rm the deletion
SELECT
NOTE: When an entry is deleted, the next oldest record is displayed.
Ring silencing
If the LCD screen shows the telephone number from an undesirable caller, you can
turn the ringer located on the left side of the base unit to the OFF position or by
pressing OFF on the cordless handset. This will silence the ringer without disconnect-
ing the call. If your answering system is on, the caller will be asked to leave a message
after the outgoing message is played.
or until
PROGRAM
or for distinctive ringer.
Y N
will be displayed with the directory entry.
on the handset to scroll to the incoming call entry to be
appears on the screen, with the current choice of
24
fl ashes.
to delete the
DEL
on the handset to activate the
CID
in
Y