American telephone & telegraph user manual 2.4 ghz cordless telephone with caller id/call waiting e2903b (60 pages)
Summary of Contents for AT&T E2115
Page 1
96-005605-030-000_E2115 QSG_R0.qxd 12/20/2004 10:03 AM Page 1 Quick Start Guide 2.4 GHz Cordless Telephone E2115 with Caller ID & Call Waiting...
Page 2
96-005605-030-000_E2115 QSG_R0.qxd 12/20/2004 10:03 AM Page 2 Installation and setup Connect the base and install batteries as shown below. After installation, place the handset in the base to charge for 15 hours before use. You can keep the batteries charged by returning the handset to the base after each use. When batteries are fully depleted, a recharge takes about 10 hours.Average talk time on a fully charged battery is about six hours depending on environmental conditions, standby time is approximately four days.
96-005605-030-000_E2115 QSG_R0.qxd 12/20/2004 10:03 AM Page 3 Quick reference guide Handset Select/Menu Press to display menu, or to select Press to scroll down in menus. highlighted item from menu. Press when phone is not in use to display Caller ID information. While entering names, press to move the cursor to the left.
96-005605-030-000_E2115 QSG_R0.qxd 12/20/2004 10:03 AM Page 4 Quick reference guide Telephone Base IN USE On when handset is in use. Flashes when another phone is in use on the same line. CHARGING On when handset batteries are charging. NEW MESSAGE Flashes when you have new voice mail (requires voice mail service from your local telephone company).