Kenwood TK-3148 Service Manual page 6

TK-3148
• Conventional mode
w Rotary encoder
Rotate this encoder to select your desired channel.
r Transmit/ Receive indicator
Lights green while receiving a signal. Lights red while
transmitting.
i PTT (Push-To-Talk) switch
Press this switch, then speak into the microphone to call
a station.
o Side 1 key
Press to return to Trunking mode.
!0 Side 2 key
Press to turn the monitor function ON in order to monitor
your selected channel.
!1 S key
Press to turn the display and keypad backlight ON.
The backlight remains ON for 5 seconds.
!2 A key
Press to add/delete channel(s) to/from Scan list.
!4 Cs key
Press to turn Scan ON (or OFF).
2-4. Display
q Sub display
displays the strength of received signals.
w Programming indicator
appears while in AUX A is being activated.
e MON (Monitor) indicator
" " appears while you are monitoring a channel by
pressing the Side 2 key. (Conventional Mode only)
r SVC (Service) indicator
" " appears when a control channel is found. It fl ashes
while the transceiver is searching for a control channel.
t SCN (Scan) indicator
" " appears while you are scanning.
y LO indicator
This icon blinks while in battery warning, if "Always" or
"Always W/beep" is selected in the battery warning set-
tings.
u Handset indicator
fl ashes when you activate call diversion.
i MAIL indicator
appears while there is data in the stack. It fl ashes when
there is new data in the stack.
o Alphanumeric display
displays call addresses, the call duration
timer, data messages, and the current operating status of
the transceiver.
6
OPERATING FEATURES /
操作特性
• 常规模式
w 旋转编码器
旋转本编码器选择您所需要的信道。
r 接收指示灯
在接收信号时点亮绿色。在发射中点亮红色。
i PTT( 按讲 ) 开关
按下该开关，然后对着麦克风讲话呼叫其他电台。
o 侧面 1 键
按下可恢复到集群模式。
!0 侧面 2 键
按下可接通监听功能来监听您所选择的信道。
!1 S 键
按下可开启显示屏和键盘背景照明。背景照明将保持 5 秒
钟。
!2 A 键
按此键可向扫描序列中添加信道或从扫描序列中删除信道。
!4 C s 键
按下可启动扫描 ( 或者停止扫描 )。
2-4. 显示
q 子显示字段
显示接收到信号的强度。
w 显示图标
当 AUX A 被激活时显示 。
e MON（监听）指示
当用户按下侧面 2 键监听某一信道时显示"
于常规模式）
r SVC（服务）指示
当找到一个控制信道时显示"
制信道时，此图标闪烁。
t SCN（扫描）指示
当用户正在扫描时显示"
y LO 指示
如果在电池电压告警设定中选择"连续"或"连续并有提
示音" ，则电池电压不足时，此图标闪烁。
u 呼叫转移指示
当对讲机处于转移状态时，此
i 信箱指示
当存储器堆栈中有接收信息时显示 。当存储栈中有新信
息时，此图标闪烁。
o 字母数字显示字段
显示呼叫地址，呼叫过程计时器，数据信
息以及对讲机当前的操作状态等。
" 。 （只适用
" 。当对讲机正在搜索控
" 。
闪烁。