Table of Contents
Advertisement
ACK timeout support
Adjustable transmission power: 5 levels
Wireless site survey: for scanning the surrounding access points for connection.
•
Gateway Features in the CPE Mode
Built-in NAT mode: to support IP sharing on the LAN side for multiple users (subscribers) to get
access to the Internet.
Built-in DHCP server for issuing local IP addresses.
Built-in DDNS/DNS client
Bandwidth management: to limit the uplink and downlink throughput of the system.
Client connection control: for WISP's operator to remotely suspend or resume the service for
subscribers at the CPE.
IP/port forwarding and DMZ
•
Security
Data encryption: WEP (64/128-bit), WPA/WPA2 with TKIP or AES-CCMP
User Authentication: WEP, IEEE 802.1X, WPA-PSK, WPA-RADIUS, MAC ACL, and MAC
authentication using RADIUS
Built-in 802.1X Authenticator
Setting for TKIP / CCMP / AES key's refreshing period
Support IEEE 802.11 mixed mode; open and shared key authentication.
Hidden ESSID: broadcast SSID option can be turned off to prevent SSID broadcast to the public.
Station Isolation setting: when enabled, all stations associated with this AP can not communicate
with each other.
Support data encryption over WDS link.
•
Administration
Web-based management interface
Remote configuration and management
Remote firmware upgradeable
Software one-button-click to reset back to factory defaults
Utilities for system configuration backup and restoration
Two administration accounts in CPE mode:
(1) "root" for WISP's administrator, who can change all settings including bandwidth limit
(2) "admin" for the local administrator, who can view all settings and change only some preferences
SNMP MIBII support (v1/v2c)
NTP time synchronization
Watch dog: auto recovery while detecting fault in the system
Syslog client
Support Event Log
Support RADIUS accounting and accounting update
7
EW-7301APg/EW-7302APg
User Manual
Advertisement
Table of Contents
