Edimax EW-7301APg User Manual page 67

•
VLAN for Management: By enabling this function, management traffic from the device is tagged with a VLAN
ID. Enter a value ranged from 1 to 4094 for the VLAN ID if the option is enabled.
•
SNMP Configuration: By enabling SNMP function, the administrator can obtain the system information
remotely.
Enable/ Disable: Check Enable button to activate this function or Disable to deactivate this service.
Community String: The community string is required when accessing the Management Information Base,
MIB.
Read: Enter the community string to access the MIB with Read privilege.
o
Write: Enter the community string to access the MIB with Write privilege.
o
Trap: Events on cold start, Interface up & down, and association & disassociation can be reported via this
function to an assigned server.
Enable/ Disable: Check Enable button to activate this function or Disable to deactivate this function.
o
Server IP Address: Enter the IP address of the assigned server to receive the trap report.
o
66
EW-7301APg/EW-7302APg
User Manual