Table of Contents
Advertisement
Step 3:
Network Settings
Click on the System button and then select the Network tab.
Enable Static, and then enter the related information in the field marked with red asterisks.
Click Save to save the settings.
Note: For more information on network settings, please refer to Section 5.1.3 – Network Setting.
Step 4:
SSID Settings
Click on the Wireless button and then select the General tab.
Set up the broadcasting SSID for easily identifying the system when device is trying to associate
the service. Enter the following information required in the blank field, and others are optional.
1. Band: Select appropriate band where the system is located from drop down list.
2. SSID: Use the default IP address or specify as desired.
Click Save and go to next step.
23
EW-7301APg/EW-7302APg
User Manual
Advertisement
Table of Contents
