Edimax EW-7301APg User Manual page 20

Step 4: Select AP to be Associated
Search for the AP to be associated with from the scan list provided in Step 3; use Cip-A3-1 as an
example here where the AP is encrypted via WEP security type.
Step 5: Security Settings
Click Setup of the Cip-A3-1, and a related encryption configuration box will appear.
Enter the information required in the configuration box. Information to be entered shall be exactly
the same as configured in the Cip-A3-1 AP.
Click Save to save the settings.
Note: For more information on security settings, please refer to Section 4.2.3 – Security Settings.
Step 6: WAN Configuration
Click on the System button and then select Network tab.
Enable Static, and then enter the related information in the field marked with red asterisks.
Click Save to save the settings.
Note:
1. Values entered in fields marked with red asterisks are samples only. The actual values shall
depend on the actual network deployment.
2. For more information on security settings, please refer to Section 4.1.3 – Network Settings.
19
EW-7301APg/EW-7302APg
User Manual