Step 5:
Security Settings
Click on the Wireless button and then select the Security tab.
Select WEP from the drop down list as an example here. Enter the information required in the
blank field, and the same information will also be used to set up devices which will then be using
EW-7301APg/EW-7302APg's services.
Click Apply to activate all settings configured so far.
Note: For more information on security settings, please refer to Section 5.2.3 – Security Settings.
Congratulation!
The AP mode is now successfully configured.
24
EW-7301APg/EW-7302APg
User Manual