Automatic Switch Off - AEG Electrolux 68031 K-MN User Manual

12
Operating the appliance
Changing the time
Step
1.
2.
After a few seconds, the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a cooking zone
Step
1.
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step
1.
Acoustic signal stops.

Automatic switch off

Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking surface automatically switches itself off.
• If one or more sensor fields are covered by objects (a pan, etc.) for longer than approx.
10 seconds, a signal sounds and the cooking surface switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically switches itself
off after approx. 10 seconds.
Control panel
• When the appliance is switched off, if one or more of the sensor fields on the control
panel are covered for more that 10 seconds, an acoustic signal sounds. The acoustic si-
gnal switches itself off automatically when the sensor fields are no longer covered.
Induction cooking zones
• In the case of overheating (e.g. when a saucepan boils dry) the cooking zone auto-
matically switches itself off.
zone must be set to
• If cookware that is not suitable is used,
the indicator for the cooking zone switches itself off.
Control panel
Select cooking zone
Touch or
Control panel field
Select cooking zone
Control panel field
Touch
and cooled down.
0
Indicator
Pilot light of the selected cooking zone flashes
faster
Time remaining is displayed
to minutes
01 99
Display
Pilot light of the cooking zone selected flashes
faster
The time remaining is displayed
Acoustic signal
Acoustic signal to acknowledge.
is displayed. Before being used again, the cooking
lights up in the display and after 2 minutes