Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AEG Electrolux 78031KF-MN
Summary of Contents for AEG Electrolux 78031KF-MN
- Page 1 78031KF-MN User manual Ceramic glass induction...
-
Page 2: Table Of Contents
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. -
Page 3: General Safety
Safety Information • To avoid small children and pets unintentionally switching the appliance on, we recom- mend activation of the child safety device. General safety • The appliance may only be installed and connected by trained, registered service engi- neers. •... -
Page 4: Description Of The Appliance
Description of the appliance Description of the appliance Cooking surface layout Induction cooking zone 2300W, with power function 3200W Induction cooking zone 2300W, with power function 3200W Control panel Induction cooking zone 2300W, with power function 3200W Induction cooking zone 2300W, with power function 3200W Control panel The cooking surface is divided into four cooking zones. -
Page 5: Control Panel Layout
Description of the appliance Control panel layout Child lock with a pilot light Stop+Go with a pilot light On/Off with indicator Heat setting indicator Power function Heat setting selection Timer Timer display Cooking zone indicators - Timer function Touch Control sensor fields The appliance is operated using Touch Control sensor fields. -
Page 6: Operating The Appliance
Operating the appliance Displays Display Description The cooking zone is switched off Keep Warm settings Keep Warm / STOP+GO function is switched on Heat settings To set heat settings Auto Warm-up The Auto Warm-up function is switched on Fault Malfunction has occurred + digit Pan detection Cookware is unsuitable or too small or no cookware... -
Page 7: Locking/Unlocking The Control Panel
Operating the appliance Control panel Display To set the heat Touch the desired heat setting, if necessary, correct setting up or down Switch off Touch Locking/unlocking the control panel The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. -
Page 8: Using The Child Safety Device
Operating the appliance Heat setting Length of the automatic warm up [min:sec] 0:12 1:21 3:07 4:24 5:51 8:12 10:12 10:36 2:01 2:01 2:28 2:52 Using the child safety device The child safety device prevents unintentional use of the appliance. Switching on the child safety device Step Control panel Display/Signal... -
Page 9: Switching The Power Function On And Off
Operating the appliance Step Control panel Display/Signal Switch appliance on Touch for 4 seconds lights up Until the appliance is next switched off, it can used as normal. After switching off the appliance, the child safety device is active again. After overriding the child safety device, a heat setting or a function must be set within approx. - Page 10 Operating the appliance Function Condition Outcome after the time has elapsed Automatic cut-out a heat setting is set acoustic signal flashes Cooking zone switches off Countdown timer cooking zones not in use acoustic signal flashes If just one countdown value is set you can change it only when the appliance is switched If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed.
-
Page 11: Automatic Switch Off
Operating the appliance Step Control panel Display Touch The time remaining counts backwards to The pilot light goes out. The Timer function for the selected cooking zone is switched off. Changing the time Step Control panel Display Pilot light of the selected cooking zone Select a cooking zone flashes more quickly Remaining time is displayed... -
Page 12: Tips On Cooking And Frying
Tips on cooking and frying • If cookware that is not suitable is used, lights up in the display and after 2 minutes the display for the cooking zone switches itself off. • If one of the cooking zones is not switched off after a certain time, or if the heat setting is not modified, the relevant cooking zone switches off automatically. -
Page 13: Tips On Energy Saving
Tips on cooking and frying a minimum diameter depending on the size of the cooking zone. Cookware with a bottom with a diameter of less than 12cm is not suitable. Tips on energy saving Place cookware on the cooking zone before it is switched on. If possible, always place a lid on the cookware. -
Page 14: Cleaning And Care
Cleaning and care Heat set- Cooking process suitable for Cook time Tips/Hints ting 12-13 Heavy frying Hash browns, loin 5-15 mins. per pan Turn halfway steaks, steaks, Flä- through cooking dle (pancakes for garnishing soup) Boiling Searing Boiling large quantities of water, cooking pasta, searing meat Deep frying (goulash, pot roast), deep frying chips The power function is suitable for heating large quantities of liquid. - Page 15 What to do if ... Problem/Display Possible Cause Remedy Automatic switch-off has been Remove any objects (pans, etc.) triggered that are lying on the control panel. Switch appliance on again There is water on the control Wipe the control panel panel or the control panel is covered with fat splashes Switch off STOP+GO...
-
Page 16: Disposal
Disposal If the appliance has been operated incorrectly, the engineer's visit will be chargeable, even during the warranty period. Operating noises Depending on the material and the processing of the base, the following noises may occur when using induction cooking zones. •... -
Page 17: Installation Instructions
Safety information Installation instructions Safety information WARNING! This must be read! The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed. - Page 18 Safety information Assembly min. 500 min. min. 5 680 +1 490 +1 min. 5 min. 20 min. 5 min. 25 min. 38 min. 5 min. 5 min. 20...
-
Page 19: Service
Service Rating Plate 78031KF-MN 949 593 062 55 GDD D4 AU AEG-ELECTROLUX Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). - Page 20 www.aeg-electrolux.co.uk...