Table of Contents
Advertisement
Configuring Windows NT 4.0
Before installing the modem, make sure you have installed the PnP ISA Enabler and
the latest Service Pack upgrade to Windows NT 4.0. See the section titled "Do This
First" for details.
Step1
Install the modem hardware and turn on your computer. Upon startup,
Windows NT 4.0 detects your modem and displays the New Hardware
Found dialog box.Select "Driver from disk provided by hardware
manufacturer" then click OK.
Note: Windows NT may detect other devices in your computer. If so, select "Do not
install a driver (Windows will not prompt you again)" for these devices.
Step 2
Insert the modems installation CD-ROM and click OK.
25
Advertisement
Table of Contents
